Description

BOLL Red Oxide Primer 1L

This is another anti-corrosion primer paint alkyd resin. Allows to obtain coatings characterized by a very good adhesion to various substrates and provides corrosion protection against external influences. Ideal for priming of steel and cast iron. Can be used as a primer for paint phthalate, chlorinated rubber, acrylic, polyurethane, and the bitumen used in car body repairs.

Clean off the coated parts of any loose rust particles or old coating. Before application, the surface should be cleaned and degreased of any dirt. Before use, mix the paint thoroughly. Can be applied with a brush, roller or air gun. In the latter case, the paint must be diluted to the appropriate viscosity with an acrylic thinner or xylene.

It is recommended to apply in 1-2 layers with an interval of min. 1 hour between coats. Application temperature above 10 ° C. and air humidity less than 80%